Static Stabilizers - Thyristor Switching Type

High reliability due to digital monitoring and controlling using micro controller.
All components sourced from reputed manufacturers, confirm to IS/BS/VDU standards.
All raw material inspection as per internal components manual.
Individual assemblies and sub assemblies tested separately.
All electronic assemblies tested on full load at 55 deg c in oven for 48 hours to Minimize failure.
Final equipment tested for accelerated life test to identify and replace any weak links.

PARAMETERS	SPECIFICATION
Single phase capacity	1 to 20 kva
Three phase (air cooled)	3 to 60 kva
Three Phase (oil cooled)	Nil
Input voltage range	170-270 Single phase 295-465 volts three phase
	195-270 Single phase 340-465 volts three phase
	205-270 single phase 360-465 volts three phase
Special range	As per customer requirements
Output voltage	230 V AC in single phase
	400 V AC in three phase
System	Unbalanced/balanced type
Connection	nil
Output Voltage regulation	nil
Servo motor drive model -A	nil
Correction speed	(+/-) 5 to 10%
Response time	nil
Servo motor model-B	nil
Correction speed	100 V/sec.
Response time	above 10 milli.sec.
Operating frequency	47 to 53 HZ
Output waveform	True reproduction of input
Insulation	Class "B"
Short circuit percentage and period	300 % for 250 milli sec.
Overload capacity	120 % for 1 minute
Effect of load P.F on OP Volts	Nil
Waveform distortion	Nil.
Duty Cycle	nil
Ambient	nil
System construction	As per IS:9815
Enclosure	Powder coated
Efficiency	Better than 98% (electrical consumption saved)
Environment	Designed for indoor / outdoor tropical use
Mounting	On wheels
Earthing	Earthing terminals provided