Servo Stabilizers - Three Phase Air Cooled

High efficiency & Fast response.
Wide input voltage range & Audiable alarm for trip conditions.
99.99% failure proof control circuit.
No over under, shoots and hunting.
Built in bypass switch upto 100 Kva.
Less active component avoids failure ratings.
Special electronic circuit to operate on gensets.
No effect of power factor and frequency variations.
Single PCB for three phase sensing and correction.
Voltage at speed related to rate of fluctuations and avoids oscillations & hunting In dc motor drive.
Variable speed high torque dc servo motor proportionally controls corrections.
Rugged and smooth ac motor drive control through optoisolator circuit which is Highly reliable.
Separate isolated PCB for triac switching for motor.

High reliability due to digital monitoring and controlling using micro controller.
All components sourced from reputed manufacturers, confirm to IS/BS/VDU standards.
All raw material inspection as per internal components manual.
Individual assemblies and sub assemblies tested separately.
All electronic assemblies tested on full load at 55 deg c in oven for 48 hours to Minimize failure.
Final equipment tested for accelerated life test to identify and replace any weak links.

PARAMETERS	SPECIFICATION
Single phase capacity	1 to 25 kva
Three phase (air cooled)	3 to 150 kva
Three Phase (oil cooled)	3 to 2000 kva
Input voltage range	170-270 Single phase 295-465 volts three phase
	195-270 Single phase 340-465 volts three phase
	205-270 single phase 360-465 volts three phase
Special range	As per customer requirements
Output voltage	220/230/240 V AC in single phase
	380/400/415 V AC in three phase
System	Unbalanced/balanced type
Connection	Star/Delta or Star/Star
Output Voltage regulation	(+/-) 1% from no load to full load
Servo motor drive model -A	AC Servo Synchronous Motor - Small
Correction speed	35 V/sec-1 ph, 60 V/sec-3 ph
Response time	Above 60 milli. sec.
Servo motor model-B	DC servo motor
Correction speed	Upto 105 V/sec.
Response time	10 milli.sec.
Operating frequency	47 to 53 HZ
Output waveform	True reproduction of input
Insulation	Class "B"
Short circuit percentage and period	300 % for 250 milli sec.
Overload capacity	120 % for 1 minute
Effect of load P.F on OP Volts	Nil
Waveform distortion	Nil
Duty Cycle	100 % continuous
Ambient	Upto 45c max above ambient Relative humidity upto 90%
System construction	As per IS:9815
Enclosure	Powder coated
Efficiency	Better than 98% (electrical consumption saved)
Environment	Designed for indoor / outdoor tropical use
Mounting	On wheels
Earthing	Earthing terminals provided